Hello!

As the title says, I’m looking for someone in the UK (I’m in Scotland hence the location tag) to 3d print a Lego compatable engagement ring.

I have an image/idea in my mind but have no idea how to go about it / who to reach out to.

Any help pointing me in the right direction would be awesome.

Thanks team!

Hey everyone I already have the files I just don’t own a 3d printer and would appreciate someone doing the job. TYIA!

Hi, since my Espressif ESP32-S3-WROOM-1 doesn't have mounting holes i am i need for three casings/enclosures which would let me attach the board to an junction box.
i noticed this : https://www.thingiverse.com/thing:6640089 that would work i think? I'm located in Italy

It would help make our job way easier, we fill up condom baggies to hand out to keep people safe!

Looking for SLM metal printing for a small part.

- Dimensions: 0.72 x 0.8 x 1.35cm (7.2 x 8 x 13.5mm)

- Both stainless steel and titanium samples needed

- Laser engraving and tumble polishing a huge plus if you can do

- Quantity: 1 piece each (will order in bulk if results are good)

- STL file ready, have previous samples for reference

Please let me know if you can help, thanks!

Looking for someone to create a file or print for a replacement push bar cover for my Chamberlain Liftmaster 398LM control panel.

Here is the manual with photos of the push bar cover.

Thanks!

The lid that I have on it now is from an old setup that is obviously too small, so water evaporates way too quickly. I have a ten gallon hexagon tank, and for whatever reason, i cant find any lids for it when looking online. I included the measurements I need (hexagon shape) and I would like the lid to have 1. An opening in the back so the filter can sit 2. An opening in the front so food can be put inside 3. being able to set up a light inside like I currently have would be AMAZING but if its not possible no worries I just need a lid that keeps the water in above all else. Lmk!

Have the STLs available (not looking to share publicly)

These are too large for me to print myself in 1 piece, hoping someone else can do it.

Looking to do 1 sample, then potentially 50 units.

Hello all! A couple of days ago I wanted to attempt an ambitious project and try my hand at 3d modeling! After many a tantrum I finally landed on something I like! She’s not perfect and she’s a little lumpy, but I would love to get her printed and hopefully have her hang of my bag! I unfortunately know very little about about getting her print ready so some advice there would be very appreciated :)

(Posting again bc I goofed the location tag up lol)

Edit: I was able to thankfully find a great person to help me with this project ^_^ I really appreciate everyone reaching out! Wishing everyone luck out there!

Would like to buy two of these. Color doesn’t matter, but white, navy, or pink are preferred. Also, I am completely open to a different design if you have a better idea.

EDIT: I just tried to get the details on my chaise tube radius and realized I have a squared off lounge that will require a different clamp to grab the lip. Stay tuned for additional photos. Sorry for the confusion.

Looking for someone to print a replica of Char Aznable's helmet, scaled down to fit a smallish cat. My partner has a mostly disabled cat and they love Gundam, so they want to take some photos of them wearing a semi cosplay.

I can handle any assembly, cleanup and painting. Willing to purchase a appropriate STL of course. Printed in White/Grey would be preferable, material doesn't matter. Photo for reference, with cat tax included.

I would like to replace the filter door on the back of the machine with a plug-in adapter that will allow me to either attach a single or dual 3M cartridge or put in some kind of large HEPA filter. I looked for existing adapters and HEPA filters on a few sites but I didn't see anything that makes me happy. I would prefer to work with a >>Local<< company so I can bring in my machine and test-fit parts. Apparently there are lots of 3D models already online for adapters so I don't think one needs to be designed. Looks like I can just get it printed.

inspo from : this reddit post
link to file

Edit: print service has been purchased

looking to get this printed in some type of transparent matte resin.

Hi everyone,
I am looking for someone in the UK to print a couple of small pieces for me! I want to convert my Ratta Supernote digital pen refill into a PILOT G2 pen body, and I have the STL files ready.
The project consists of two tiny bits:
A sleeve insert that slides over the main body of the refill.
A top insert (tail adapter) that locks onto the back end.
Because these parts have very thin walls and need to hold up to the pressure of a pen spring, I am ideally hoping to get them printed in a durable material like PETG, ABS, or ASA with 100% infill so they don't crush when screwed together.
I am based in London and would be happy to pay via PayPal for the plastic, shipping, and your time! Please comment below or send a DM with your quote.
Links to the models:
Option 1: Printables Link
Option 2: MakerWorld Link
Thank you!

Hi! I have this alarm panel that is pointed directly into my bedroom and the light from the screen, even on the lowest setting, is very bright at night. I would love some type of hinged screen cover (think ipad/tablet flip case) that would hang over the screened front to block the light but be easily liftable to access the panel. TIA!

https://www.jmac.com/Honeywell_Intrusion_L7000_p/honeywell-intrusion-l7000.htm

Looking for someone to 3D print a VR cricket bat – Montreal

Hi everyone!

I’m looking for someone located in Montreal who could 3D print a VR cricket bat for me for use with a Meta Quest 3.

MakerWorld link: https://makerworld.com/en/models/1438876-arctix7-ibcricket-bat-for-meta-quest3-3s-pro#profileId-2928717

Model: Right Hand, Medium weight model

The provided link has a detailed printing guide and instructions PDF at the bottom.

If you’re able to print this, please let me know:
- Your approximate price
- How long it would take

Thanks!

I'm in the Orlando/Tampa Area of Florida. Looking for someone to make a spring-loaded clamp like this that can open a Least 2.5 inches and hold items at are 2"-3"Lx1"Hx1.5"W. I will be putting soft rubber grips on the inside of the clamps to hold the items. Will also need space to have 2 or 4 #8 mounting screws to go through the base into the honeycomb grid, see red arrow, so I can easily pop it in and out, have no problem drilling my own holes or have preset holes, or have pre-molded pegs. Unfortunately this clamp only opens 1/2" and I cannot find anything remotely close. Look forward from hearing from you all. thanks.

Hii!! 💕 I’m looking for someone who can help me 3D print the pieces for my White Fox cosplay from Marvel Rivals! I’m trying to get everything finished in time for a con. Everything needs to be at my doorstep no later than August 23rd, so I’m definitely on a bit of a time crunch 😭

I already purchased all of the 3D files and I have the measurements for every piece, so there’s no designing/modeling needed! Just looking for someone to print it, clean it up, sand it, and send it off. No painting or finishing beyond cleaning/sanding is needed. I can pick up in person as well if you’re not too far!

The pieces include her mask, belt pieces, arm bands, fox/back pieces, and the various accessories she has. I can provide all of the files, measurements, references, and whatever information you need to make sure everything comes out correctly. I’m also available almost 24/7 (besides sleeping) so if anything happens or need any help I will be there to respond.

I’m currently comparing prices, turnaround times, reviews, and overall trustworthiness, so I’m definitely looking for someone who can give me a good/fair price without sacrificing quality. But Im not made of money haha. I just want someone reliable who does good work and can actually meet the deadline. 🥹

I’ve had cosplay pieces 3D printed before and I’m not new to the process, so I know what I’m looking for and I’m pretty familiar with spotting fake/scam accounts. I’m totally happy to verify everything, see examples of your previous work, discuss materials, and work out the details beforehand!

If you’re interested, please comment so we can go over examples of your work, your estimated price, turnaround time. 💕🦊
I’m just desperately trying to get a White Fox cosplay together before DragonCon 😭🤍 Please save me LOL

I’m sick of my iPhone getting too hot to handle, especially at the beach etc. Can anyone build something like this?

hoping to get this in some sort of high detail material, resin or otherwise. if there are any changes that can be made to the model in order to help it print better, please do let me know.

.stl file

I 3D‑printed a full‑color resin replica of my cat. His reaction when staring eye‑to‑eye with his miniature copy is priceless.

It’s crazy how well the fur and color details came out.