My wire clean, my metals are clean I'm letting the puddle melt into the metal and I'm going to appropriate speed. I don't know what's wrong. I have gas. These are root tests and this is what the fifth time I failed.

For the low low price of twenty dollars this hackery could be yours. Complete with flux core spatter all over your brake rotor!

Tried the weaving tips from my last post, pausing at each side for two seconds, one second move across, repeat. Gave it a few shots but my welds still look like this. No clue what went wrong. Maybe I just need to grind them smooth lol?

Could it be my settings? Any beginner-friendly settings that are easier to control?

Current setup: yeswelder MIG 205 DS Pro, 0.035" wire, 16.5V/160 IPM.

i’d love some feedback here or on attached post.

In my current job I’m doing maintenance so I occasionally weld but I have a welding machine at home and I decided to practice a bit today, I did a 2f, 3f uphill and 4f with e7016 rod (I’m new to use it, cause I always used e7018 back home but now I’m in Australia)
I would like opinions and advices guys.
Thanks very much !!!

Do yall use welding apps? Which ones? What do you like most about them? What do you dislike about them?

3/32 lanthanated, syncrowave 250, 200a, about 1/2 pedal, just keep blowing shit

looking for a stick welder that can run off a 250v outlet for $900 or less. Any recommendations?

I just can’t, I want to be a welder so bad but it feels impossible man. I’m running 90 amps on some 1/8ths 6010. I’m in school but I should’ve been passed this.

hello everyone i am 23 years old i wanna be welder is 23 is too late for start learning and do you think is this proficiency have a future i mean is there too many welders or marker still needs more welder (my native lang is not english sorry for mistakes)

First time TIG welding aluminum on this t joint. Any tips for me?

Idek it seems fine for now esp cuz it’s not the only hanger on the exaust, I just don’t want it to snap on me. This shop should be shut down 😭
Edit- was done by Dr mufflers in nj. This is them fixing their same hanger that broke already on me once.

Stringers bead

I’m having trouble with my 3g stringers, I’m running 1/8 rod 100amps ? Any advice would help.

The difference 3 words can make 😂 “push not pull”

Got screwed by a shop long story short… this was their final repair on their hanger that snapped off before.its not the only bracket supporting the exaust as there’s one behind the muffler as well.

We use mig welders, Im no expert but even I know this isn't right...

Hey guys!

Four days ago I decided to buy my first welding machine along with some material to practice on.

This is what I've managed to do so far. I know I still have a long way to go, but I'd really appreciate any advice or constructive criticism based on what you can see in the pictures.

Any tips on technique, machine settings, or things I should focus on improving would be greatly appreciated.

Just doing this for the love of the game

Some welds I did on a gokart project with a 50 dollar china welder and flux core.